1. Controller Pairing

 Press "OK" and "VOL- "button at the same time for 3 seconds until the controller’s signal light starts flashing. The display will show “Controller Connected”. The controller can also be used as a mouse by pressing the “mouse” button on the upper right of it.

After the first pairing, the controller can be activated by pressing any button.

 

2.Conferencing Management

Adjust Volume: Use the volume buttons on the controller.

Switch Modes: Use the mode button to switch between Discussion Mode, Presentation Mode, Patrol Mode, Global Mode, and Custom Mode.

View Locking and Zoom: Meeting Pro supports view locking and zoom functions, except in Global Mode.

To adjust and fix the conferencing picture, please follow the steps below (using Discussion Mode as a example):

1. Long press the “Mode” button on Meeting Pro or the “Lock” button on the controller, and turn off the “mouse” button to enter view locking mode with a lock symbol at the bottom left corner of the screen.
2. Use the direction buttons to choose the desired screen. The selected screen will show in a blue frame.
3. Press the OK button on the controller to select the one you want to adjust, then the blue frame will become white. Use the direction button to adjust the view.
4. Press volume +/- buttons to zoom in/out, and press the OK button again to finish.

 

3: Conferencing Recording

Insert SD card (FAT32 Only) into Meeting Pro. Press the record button on the controller or long press the mute button on the camera. The Camera Tool will start recording the local video automatically. Press the same button again to end the recording.
Remove the SD card to retrieve the conference video from DClM file.
Long press the power button on the controller or Meeting pro to switch off.

 

 

(If you have any questions, please feel free to contact our service team at service@kandaovr.com for assistance.)

 

Read More:

GET STARTED WITH KANDAO MEETING PRO HOST MODE>

GET STARTED WITH MEETING PRO USB MODE>